Current Probes can Measure from 30A to Micro Currents
Hioki has launched current probes CT6710 and CT6711. Both products provide three ranges (30A, 5A, and 0.5A) to facilitate observation of waveforms representing currents as large as 30A or as small as several hundred microamperes. This capability makes the probes suited for observing current waveforms under a variety of operating conditions, including inrush currents, micro currents, and high-speed currents.
Anticipated applications for these new current probes include: Development and design of electrical and electronic devices, industrial devices, electronic components, mobile devices, etc.; Development and design of automobiles, transport equipment, and motors; and Fundamental research at universities, research institutes, etc.
In 2014, the company sought to meet customer demand for high sensitivity by introducing a pair of current probes (the CT6700/CT6701) with 10-times the sensitivity of the legacy models (the 3273/3276). However, the new devices’ current-measuring capabilities were limited by its single range (5A) configuration even as demand for a single probe capable of measuring both micro and large currents grew. To meet this demand, HIOKI sought to develop a current probe with a wide frequency band (dc to 120MHz) and a broad measurement range (0.5A to 30A).
Summary of features
- Observe waveforms from 30A to micro currents thanks to 3 ranges (30A, 5A, and 0.5A)
Existing current probes such as the Hioki CT6700 and CT6701 offer a single, 5A range. The new CT6710 and CT6711 provides three ranges (30A, 5A, and 0.5A) so that users can observe a wide range of current waveforms with one device. The result is an instrument capable of accurately identifying currents under various operating conditions, for example by using the 0.5A range to measure micro currents and the 30A range to measure inrush currents. In addition, the range can be switched simply by pressing a button on the probe’s relay box.
- Observe current waveforms across a wide frequency band
The CT6710 and CT6711 can observe current waveforms across a wide frequency band, from dc to megahertz bandwidths. With a band of either dc to 50MHz (CT6710) or dc to 120MHz (CT6711), the probes accommodate use in an array of settings.
- Ten-times the sensitivity of existing and comparable probes, enabling micro currents on the order of several hundred microamperes to be observed clearly
Because they offer higher sensitivity than existing devices, the CT6710 and CT6711 can observe micro currents with a high degree of clarity. The output rate of 1 V/A on the sister products, CT6701 and CT6700, as well as competitive devices means that they generate an output voltage of 1V for a current value of 1A. At this low output rate, users need to set the oscilloscope to a high-sensitivity range where noise is more pronounced, resulting in the inability to precisely identify micro currents that are hidden by the noise.
In contrast, the CT6710 and CT6711 deliver an output rate of 10 V/A when using the 0.5A range, giving them 10-times the sensitivity of prior Hioki probes. The higher output rate enables users to make measurements at the low-sensitivity range where noise is less noticeable. Additionally, overall improvements in the probes’ S/N ratio allow use of oscilloscope functionality to observe micro current waveforms with a high degree of clarity.
- One-touch BNC connectors
Connect the CT6710 or CT6711 to an oscilloscope or Memory HiCorder simply by inserting its connector straight into the host instrument’s BNC connector, eliminating the need to rotate to tighten. In addition, the connector is locked in place automatically so that there’s no need to worry about the sensor accidentally detaching. One-touch disengagement of the locking mechanism makes it easy to disconnect the probe.