Components

8V to 60V Dual 1.5A Circuit Breaker ICs with Accurate Current Monitoring

The MAX15162/MAX15162A devices from Maxim Integrated Products are dual-channel circuit breaker ICs. The devices integrate a dual-channel controller with dual 140mΩ (in WLP, 180mΩ in TQFN) power MOSFETs and electronic circuit breaker protection in a single package.

These devices feature constant power control during startup to keep the MOSFET operating under Safe Operating Area (SOA). The devices provide robust overcurrent protection with programmable current-limit level, and adjustable overcurrent shutdown delay for better immunity against system noises and load transient. The current monitoring pins provide a current sense accuracy of ±3% for each channel.

When there is short-circuit at the output, a fast current limit comparator turns off MOSFETs within 200ns to isolate the load from the input. During a fault condition, the MAX15162A enters auto-retry mode and the MAX15162 enters latch off mode. For both devices, the ALRT pin asserts a fault indication. The MAX15162/MAX15162A can be configured as two independent channels or two parallel channels for one common output.

The devices feature a number of protection features including; IN-to-OUT short-circuit protection, output short-circuit protection, startup watchdog timer, input undervoltage lockout and internal overtemperature protection.

The MAX15162/MAX15162A are available in a 24-pin, 4mm x 4mm TQFN package and 16-bump, 2mm x 2mm WLP package and are rated over the -40°C to +105°C operation temperature range.

Key Features

  • 8V to 60V Wide Input Voltage Range
  • Integrated Dual-Power MOSFET
  • Turn-On Resistance 140mΩ (WLP), 180mΩ (TQFN) MOSFET
  • Dual-Channel Independent or Parallel Mode Configuration
  • ± 3% Accuracy Current Reporting on Individual Channel
  • Enable Inputs for Individual Channels
  • Constant Power Control at Startup
  • Startup Watchdog Timer
  • Startup IN-to-OUT Short Protection
  • Undervoltage-Lockout
  • Overcurrent and Overtemperature Fault Status indication
  • Multilevel Overcurrent Limit Protection
  • Built in Thermal Shutdown Protection
  • Programmable Current Limiting Level
  • Programmable Overcurrent Shut-down Delay time
  • Programmable Auto-Retry Time (MAX15162A)
  • Latch Off in a Fault Event (MAX15162)
  • Auto-retry in a Fault Event (MAX15162A)
  • 24-pin, 4mm x 4mm TQFN or 16-bump, 2mm x 2mm WLP
Maxim Integrated Products Inc.
To Top

Join 50,000+ Power Pros

 

  • Keep pace with relentless innovation
  • Influence the conversation
  • Take your insights to another level

You have Successfully Subscribed!