Power Supplies

4080W AC-DCs Accept 3-Phase 400/440/480Vac Delta or Wye Inputs

TDK Corporation has introduced the TDK-Lambda brand TPS4000-24 ac-dc power supply, extending the existing 3000W rated TPS series.  Delivering up to 4080W output power (24V at 170A) in a 2U high package, the TPS series operates from a wide range Delta or Wye 350- to 528-Vac three-phase input.

This industrial ac-dc power supply is suited for use in many applications including test and measurement equipment, semiconductor fabrication, additive manufacturing, printers, lasers and RF power amplifiers.  The high voltage, three-phase input avoids the requirement for costly step-down transformers and assists phase load current balancing.

The TPS4000-24 is fully featured with isolated AC Fail, DC Good and dropped phase signals, remote on/off, remote sense and a 12V 0.3A standby supply.  A PMBus™ communications interface allows remote monitoring of the output voltage, output current, internal temperature, status signals and fan speed.  In addition, the output voltage, over current limit and the remote on/off can be programmed by the PMBus™.

The output voltage can also be adjusted from 19.2 to 28.5V and the current limit point by 70-105% using front panel potentiometers or an analog 0-5Vdc voltage.  Up to eight units can be connected in parallel for higher power and internal ORing FETs allow redundant operation.

The 92% efficient unit can operate at full load in ambient temperatures of up to 50ºC, and deliver up to 55% load at 70ºC.  Cooling is provided by an internal temperature controlled fan to reduce acoustical noise. The case measures 107 x 84.4 x 335mm, making it suitable for 2U high racking systems. The weight of the product is just 4kg.

The power supply has 3kVac input to output, 2kVac input to ground and 500Vdc output to ground isolation.  All TPS models are certified to IEC/EN/UL/CSA 60950-1, (62368-1 pending) and carry the CE mark for the Low Voltage, EMC and RoHS Directives.  The TPS4000 also complies with EN55032-A (conducted and radiated emissions), SEMI F47-0706 (line dips), IEC 61000-3-2 (harmonics), IEC 61000-4 (immunity), and is designed to meet the MIL-STD-461F/G CS101, CS114 (Army Ground), CS115, CS116 immunity standard.

Main features and benefits

  • Suitable for 400/440/480Vac 3-phase Delta and Wye inputs
  • Compact 2U high package size
  • Fully featured
  • 92% efficient
  • PMBus™ communications interface for remote programming and monitoring
TDK Corporation
To Top

Join 50,000+ Power Pros

 

  • Keep pace with relentless innovation
  • Influence the conversation
  • Take your insights to another level

You have Successfully Subscribed!