Sanken Semiconductors introduced the SX68200M series of 3-phase brushless motor drivers which integrate output transistors, pre-drive circuits, and bootstrap diodes with current-limiting resistors.
A sinusoidal driving strategy with sensorless vector control of the SX68200M series brings small-sized, high-efficiency, and low-noise motor controlling into your application, according to Sanken. These products can run on a 3-shunt current detection system, and they optimally control the inverter systems of medium-capacity motors that require universal input standards. The drivers can be used to control fan motors for air conditioning and air purifiers, and they can be used to control stand-alone electric fans.
The motor drivers offer EEPROM as control parameter storage, and they provide two, speed control (PI Control) Modes; analog voltage control via the VSP Pin, and serial communication control (I2C compatible).
Protections include under-voltage protection, watchdog timeout detection, and memory error detection; over-voltage protection and under-voltage lockout for main power supply; soft over-current protection; hard over-current protection; thermal warning; TSD operating temperature; under-voltage lockout for logic supply; and loss-of-synchronization protection.
- Sinusoidal Current Waveform (Low Noise, High Efficiency) Sensorless Vector Control (High Efficiency at Load Variation, Small Size)
- Built-in Bootstrap Diodes with Current-limiting Resistors
- EEPROM as a Control Parameter Storage
- Two Speed Control (PI Control) Modes:
- Analog Voltage Control (VSP Pin)
- Serial Communication Control (I2C Compatible)
- 3-shunt Current Detection
- DIAG Pin Fault Signal Output
- Under-voltage Protection
- Watchdog Timeout Detection
- Memory Error Detection
- Over-voltage Protection and Undervoltage Lockout for Main Power Supply
- Soft Over-current Protection
- Hard Over-current Protection
- Thermal Warning
- TSD Operating Temperature
- Under-voltage Lockout for Logic Supply
- Loss-of-Synchronization Protection