The 6W Interpoint® MSA+ Series of dc-dc converters occupies only 1.13 in2 (7.31 cm2) with an input range of 15- to 50-Vdc and a choice of 8 different outputs. Available in non-flanged or as an offset flange package for greater board density. The converters are offered with /883 (Class H), ES or standard screening.
The converters are switching regulators that use a flyback converter design with a constant switching frequency of 400kHz typical. They are regulated, isolated units using a pulse width modulated topology and are built as high reliability thick-film hybrids. Isolation between input and output circuits is provided with a transformer in the forward power path and in the feedback control loop.
Excellent input line transient response and audio rejection is achieved by an advanced feed-forward compensation technique.
You may also like: 65W AC-DC Power Supplies Approved for Use in 2 x MOPP Applications
For dual outputs, negative output regulation is maintained by tightly coupled magnetics. Up to 4.8W, 80% of the total output power, is available from either output, provided that the opposite output is simultaneously carrying 20% of the total power in order to maintain the specified regulation on the negative output.
A predictable current limit is accomplished by direct monitoring of the output load current, which results in a constant current output. Internal input and output filters eliminate the need for external capacitors for stable operation.
Summary of Features:
- Small size of 1.13 in2 (7.3 cm2). Offset flange option provides greater board density
- 15 to 50 input voltage range
- Transient protection 80 volts for 1 second
- Operating temperature -55° to +125°C
- Magnetically isolated
- Fixed high frequency switching
- Inhibit function
- Indefinite short circuit protection
- Typical 76% efficiency
- Case size: 1.065 × 1.065 × 0.35 inches (27.05 × 27.05 × 8.89 mm)