Vishay Showcase Efficiency and Reliability at Tokyo Big Site
Vishay Intertechnology, Inc. announced that it will be exhibiting its latest semiconductors and passive components in booth 1C-205 at Power System Japan, a focused exhibition on power systems at Techno-Frontier 2014, being held at the Tokyo Big Sight this week. A component solutions provider for connectivity, mobility, and sustainability, Vishay will highlight industry-leading innovations — including passive components, diodes, power MOSFETs, and optoelectronics — that provide increased efficiency and reliability for a wide range of applications.
To address the increasing demands associated with automotive designs, specifically in powertrain and hybrid vehicle applications, Vishay Siliconix will showcase its low-profile, high-power-density AEC-Q101-qualified SQ Series MOSFETs in a wide range of packages. Optimized for automotive excellence, SQ Series devices are produced using a special process flow in fabrication and assembly to reduce defects. Featuring low on-resistance n- and p-channel TrenchFET® technologies, the MOSFETs are rated for a maximum junction temperature of +175 degrees C and offer a rugged silicon design. Also featured will be Vishay Siliconix DrMOS solutions and analog switches.
For automotive and solar inverter applications, Vishay will be featuring diodes in a variety of low-profile packages, including 45 V to 120 V TMBS® Trench MOS Barrier Schottky rectifiers in the SMPA (DO-221BC) and SMPD (TO-263AC) packages, and FRED Pt® ultrafast recovery rectifiers in the SlimSMA (DO-221AC) and SMF (DO-219AB) packages. In addition, power modules in the EMIPAK-2B package featuring solderless pressfit technology will be on display.
Vishay will also highlight optoelectronics products for MRI machines, computer servers, and alternative energy and industrial applications. Devices on display will consist of 5 MBd high-speed optocouplers, matched infrared emitters and phototransistors, high-brightness 0603 ChipLEDs, 2.5 A IGBT and MOSFET drivers, and solid-state relays.
Passive components from Vishay will consist of a wide variety of the company’s latest capacitors, resistors, and inductors. Highlighted resistors will include Vishay Dale Power Metal Strip® resistors with high-temperature capabilities to +275 degrees C and high-current Power Metal Strip shunts for power meter and battery management applications; AEC-Q200-qualified Vishay Draloric/Beyschlag MELF resistors; Vishay BCcomponents high-voltage metal glaze leaded resistors; and Vishay MCB's water-cooled wirewound resistor and thick film devices with power to 750W. Also highlighted will be high-precision thin film chip resistors and Vishay Dale Thin Film PAT resistors for high-temperature applications.
Featured capacitors will include Vishay ESTA power electronic capacitors, as well as Vishay Roederstein polypropylene film capacitors for DC-link applications and snubber devices for solar and wind inverters. Vishay Dale will be showcasing automotive-grade low-profile, high-current IHLP® inductors, and high-temperature through-hole inductors for desktops and servers.
