.gif)
.gif)
Industry News
July 13, 2012
PRBA Battery Proposals Adopted By UN Transport Sub-Committee
The Rechargeable Battery Association (PRBA) announced that the UN Sub-Committee of Experts on the Transport of Dangerous Goods unanimously approved two proposals on the packaging requirements for large format lithium ion batteries filed by jointly by PRBA and its international counterpart, RECHARGE. Large format lithium ion batteries are used as the power source for electric vehicles.
The UN Sub-Committee’s decisions will eliminate the need for battery manufacturers to secure approvals from transportation authorities before shipping lithium batteries in large packaging as defined in UN’s Model Regulations. The regulations imposing large packing instructions for lithium batteries will take effect in January 2015. "We are pleased by the Sub-Committee’s support for these proposals. PRBA has long endorsed international regulations, which are essential to the safe transport of lithium ion batteries," said PRBA Executive Director George Kerchner.
PRBA presented five papers at the UN meeting held the week of June 25 in Geneva, Switzerland. These papers addressed the packaging and testing of new lithium ion batteries as well as the shipment of waste lithium ion batteries and damaged and defective lithium ion batteries.
After numerous meetings and discussions, no consensus was reached on the PRBA-RECHARGE proposals for shipping waste lithium batteries and damaged/defective lithium batteries. PRBA and RECHARGE will amend their proposals for consideration at the Sub-Committee’s next meeting scheduled for December 3-11, 2012. PRBA’s paper on testing small battery assemblies was also discussed. PRBA intends to file a proposal with the Sub-Committee that will more clearly define the UN testing requirements for these assemblies and provide an alternative to the UN tests.
More news and information regarding the latest developments in Smart Grid electronics can be found at Darnell’s SmartGridElectronics.Net.
Share this story
Send via E-mail
Post to Twitter
On the Web:
White Papers
March 11, 2013
Power Modules for Charger Applications
Sponsored by Vincotech
February 27, 2013
The Adaptive Cell Converter Topology Enables Constant Efficiency Over Universal Input AC Line in Front-End, High-Density Power Factor Correction Applications
Sponsored by Vicor Corp.
February 27, 2013
From 48 V direct to Intel VR12.0: Saving "Big Data" $500,000 per datacenter, per year
Sponsored by Vicor Corp.
More White Papers
- Altera Acquires Enpirion for $140 Million, Forms Power Business Unit
- SiC Modules, IGBTs and Super-Junction MOSFETs Introduced on Day One of PCIM
- PowerbyProxi Joins Wireless Power Consortium
- Ericsson Saves Board Space with Surface-Mount Digital Bus Converter
- SiC and GaN Again a Major Focus at PCIM Europe
- Vincotech and Infineon Introduce New Packaging Options at PCIM Europe
- Bosch Claims First Sub-$450 240V EV Charging Station
- DOE Selects Consortium to Develop Next-Generation Batteries for Automobiles
- Gate Drive Optocouplers for High-Speed SiC FETs Deliver up to 2.5A
- Dana Receives Grant from NRCan to Improve Thermal Management for EV Battery Packs
- Power-One Gets $1 Billion – ABB Gets Inverters
- Renesas Adds IGBT Drivers with Micro-Isolator for Electric and Hybrid Vehicle Inverters
- Bosch Claims First Sub-$450 240V EV Charging Station
- Alpha and Omega Delivers "Lowest" On-Resistance in a DFN5x6 with 150V Power MOSFET
- Microchip Expands 8-bit PIC Microcontroller Family with Intelligent Analog Integration
- 500W Full-Brick DC-DC Converter Optimized for Fuel Cell Applications
- Factory to Produce Lithium-Ion Battery Materials Enabling 10-Year Life and 60,000 Cycles
- Europeans Establish Dueling Projects to Advance Power Electronics Technologies
- 1-Watt DC-DC Achieves 88% Efficiency and has MSL 1 Moisture-Sensitivity Rating
- Alpha and Omega Expands Family of EZBuck Regulators Featuring Constant On-Time Control
- Green Building Power Forum 2010: Fujitsu Components America
- Darnell's Digital Power Forum 2009: CUI Incorporated
- Green Building Power Forum 2010: EMerge Alliance
- Green Building Power Forum 2010: Anderson Power Products
- Green Building Power Forum 2009: Independence Station
- Darnell's Digital Power Forum 2009: Coilcraft
- Darnell's Digital Power Forum 2009: Champs Technologies
- Darnell's Digital Power Forum 2009: EXAR Corporation
- Darnell's Digital Power Forum 2009: PMBus
- Darnell's Digital Power Forum 2009: Power Plaza
Design Features
October 22, 2012
Energy Efficiency with Class D Amplifier Modules
Class-D switching amplifiers are helping audio designers create personal multimedia devices and home audio/visual systems that demonstrate how compact and stylish equipment can also deliver high sound quality and high audio output power. The key to this breakthrough, providing freedom from the large and bulky boxes housing traditional audio products, lies in the class-D amplifier’s high energy efficiency, which is typically around 90%. This allows designers to reduce or eliminate heatsinks as well as using smaller-sized PCBs and smaller components such as transformers, connectors and power supplies.
Design Features
October 8, 2012
The Role of Hall Effect Sensors in Power Distribution Infrastructure
Power distribution units (PDUs) form an essential part of modern computing and data communications hardware. They provide multiple outputs for transferring electrical power with maximum efficiency, controlling the power capacity and safeguarding against the possible causes of supply interruption. With an ever increasing need from tech savvy consumers for higher data throughput and greater quantities of data storage capacity, as well as tough international legislation now governing CO&sub2; emissions, the demands being placed on these units are proving challenging for engineering teams to satisfy.
Product Focus
August 13, 2012
The Year in AC-DC Power Supply Technology
The past year witnessed significant new product releases, technological developments, and industry news related to the field of AC-DC Power Supply technology.