.gif)
.gif)
Industry News
June 18, 2012
Audi Achieves First Victory of a Hybrid Vehicle at Le Mans
AUDI AG announced that it has achieved another technological milestone in motorsport. On the 80th running of the famous Le Mans 24 Hours, a vehicle with hybrid drive – the Audi R18 e-tron quattro – has triumphed for the first time.
The four Audi R18 cars from Audi Sport Team Joest were the quickest and most reliable vehicles and after 24 hours occupied positions one, two, three and five.
"By achieving this further success at the world’s most important endurance race our engineers demonstrated their high technological expertise in a particularly impressive way," commented Rupert Stadler, Chairman of the Board of Management of AUDI AG, who personally watched the race on location. "With the e-tron quattro in combination with ultra lightweight design, we put a completely new technology on the grid and immediately won with it – this cannot be taken for granted by any means, particularly here at Le Mans. This weekend again showed the type of things that can happen in this race and how important perfect preparation is."
Operating at the rear of all four Audi R18 cars was the latest evolution of the compact V6 TDI engine with VTG mono turbocharger that was used at Le Mans for the first time in 2011. The new ultra-light transmission with a carbon fiber housing – a novelty in a Le Mans sports car – held up to the Le Mans endurance test covering a distance of 5.151 kilometers in all four vehicles without any problems as well. Like quatto all-wheel drive, ultra-lightweight design is a core competency of the company.
"This was a race of the kind you can arguably experience only at Le Mans," said Head of Audi Motorsport Dr. Wolfgang Ullrich after his four Audi R18 cars had crossed the finish line. "You should never rejoice too early at Le Mans, which was obvious again especially on Sunday noon. The whole world was already talking about a one-two-three-four victory and all of a sudden two of our cars had accidents almost simultaneously. That the squad repeatedly managed to repair the cars so quickly after the slips clearly speaks for Audi Sport Team Joest that can simply be banked on at Le Mans. On the whole, I can only take my hat off to the entire squad of Audi Sport that worked extremely hard for a year to make this triumph possible. It was a very big challenge to develop a hybrid car in such a short time that is quick and able to hold up for 24 hours. The fact that, as in 2001 with the TFSI engine and in 2006 with the TDI, we managed to be successful right on the first run simply proves the level of technological expertise that is available at Audi. This is a great day for Audi Sport, for Audi and for the e-tron quattro."
Share this story
Send via E-mail
Post to Twitter
On the Web:
White Papers
March 11, 2013
Power Modules for Charger Applications
Sponsored by Vincotech
February 27, 2013
The Adaptive Cell Converter Topology Enables Constant Efficiency Over Universal Input AC Line in Front-End, High-Density Power Factor Correction Applications
Sponsored by Vicor Corp.
February 27, 2013
From 48 V direct to Intel VR12.0: Saving "Big Data" $500,000 per datacenter, per year
Sponsored by Vicor Corp.
More White Papers
- Ericsson Delivers 750W Quarter-Brick using Proprietary HRR Topology
- IXYS Introduces an Anode-Gated Thyristor Technology Platform
- Dreamliner Nightmares a Factor in New UL Standards Activities for Li-ion Batteries
- Ideal Diode Bridge Controller Minimizes Rectifier Heat and Voltage Loss
- Siemens Installing Regenerative Energy Storage Unit on Light Rail Line
- Silicon Labs acquires Energy Micro for IoT, Smart Energy and Portable Electronics
- NXP Brings High Efficiency to 12V MR16 Lamps with Dimmable LED Controller
- Ultra-Compact High-Efficiency Power Supplies for Automotive Applications
- Curtis Industries Acquires California-based Tri-Mag
- Convection-Cooling Eliminates Fan Maintenance and Audible Noise in 250W Power Supplies
- Single-Stage LED Drivers Deliver Dimming and Thermal Protection with Lower BOM Cost
- Convection-Cooling Eliminates Fan Maintenance and Audible Noise in 250W Power Supplies
- Ericsson Delivers 750W Quarter-Brick using Proprietary HRR Topology
- Siemens Installing Regenerative Energy Storage Unit on Light Rail Line
- Dreamliner Nightmares a Factor in New UL Standards Activities for Li-ion Batteries
- GE Intros Megawatt UPS Global Platform with Industry-Leading Efficiency
- Dow Corning adds Thermal Management Options Optimized for Electronics Applications
- ABB Demonstrates Technology to Power Flash Charging Electric Bus in 15 Seconds
- Power-One Announces New Open-Frame Products for Industrial and Medical Applications
- ABB to Produce PV Inverters in South Africa as Solar Market Expands
- Green Building Power Forum 2010: Fujitsu Components America
- Darnell's Digital Power Forum 2009: CUI Incorporated
- Green Building Power Forum 2010: EMerge Alliance
- Green Building Power Forum 2010: Anderson Power Products
- Green Building Power Forum 2009: Independence Station
- Darnell's Digital Power Forum 2009: Coilcraft
- Darnell's Digital Power Forum 2009: Champs Technologies
- Darnell's Digital Power Forum 2009: EXAR Corporation
- Darnell's Digital Power Forum 2009: PMBus
- Darnell's Digital Power Forum 2009: Power Plaza
Design Features
October 22, 2012
Energy Efficiency with Class D Amplifier Modules
Class-D switching amplifiers are helping audio designers create personal multimedia devices and home audio/visual systems that demonstrate how compact and stylish equipment can also deliver high sound quality and high audio output power. The key to this breakthrough, providing freedom from the large and bulky boxes housing traditional audio products, lies in the class-D amplifier’s high energy efficiency, which is typically around 90%. This allows designers to reduce or eliminate heatsinks as well as using smaller-sized PCBs and smaller components such as transformers, connectors and power supplies.
Design Features
October 8, 2012
The Role of Hall Effect Sensors in Power Distribution Infrastructure
Power distribution units (PDUs) form an essential part of modern computing and data communications hardware. They provide multiple outputs for transferring electrical power with maximum efficiency, controlling the power capacity and safeguarding against the possible causes of supply interruption. With an ever increasing need from tech savvy consumers for higher data throughput and greater quantities of data storage capacity, as well as tough international legislation now governing CO&sub2; emissions, the demands being placed on these units are proving challenging for engineering teams to satisfy.
Product Focus
August 13, 2012
The Year in AC-DC Power Supply Technology
The past year witnessed significant new product releases, technological developments, and industry news related to the field of AC-DC Power Supply technology.