.gif)
.gif)
New Products
May 23, 2012
Mitsubishi Electric Develops All-SiC Inverter with High Power Density
Mitsubishi Electric Corp. announced it has developed a prototype forced-air-cooled three-phase 400V output inverter with all-silicon carbide (SiC) power modules that has a power density of 50kVA per liter. The inverter is expected to contribute to smaller and lighter power-electronics equipment in automotive and industrial applications, among others.
The module, which is rated at 1,200V/300A, incorporates a SiC MOSFET (metal oxide semiconductor field effect transistor) and SiC SBD (schottky barrier diode). To increase power density, electric current density must be increased by lower electric resistance, so Mitsubishi Electric developed low-resistance wiring by using direct lead bonding to connect power semiconductor chips directly to the main terminals, eliminating the use of conventional high-resistance aluminum lead wires.
To achieve high current density, low-loss (low-resistance) power chips also had to be used, but this required the application of high-speed protection circuits to prevent a large destructive current during short circuits. Mitsubishi Electric applied a SiC-MOSFET with a built-in current sensor function to its all-SiC power module and utilized a high-speed short-circuit-protection circuit, making it possible to use a low-resistance SiC-MOSFET even at a high current density. In so doing, the company successfully achieved a power density of 50kVA per liter by an inverter operation with an output of 156kVA.
Related: Touchstone Intros Ultra Low-Power, Load-Independent, High-Efficiency Boost
While silicon (Si) has traditionally been used for power semiconductor devices, in recent years SiC has come to be widely considered as a promising next-generation material. Compared to Si, SiC has a critical electric field for breakdown that is about 10 times higher and enables the reduction of power loss, which contributes to fewer emissions of carbon dioxide. Furthermore, the reduction of power loss implies the reduction of cooling equipment, and contributes to overall downsizing and lightening of electronic components for automotive and industrial uses.
Mitsubishi Electric plans to further downsize inverters for commercial viability.
Opinion: Maximising Synergies between Power Electronics and ICT for improving Energy Efficiency
More news and information regarding the latest developments in Smart Grid electronics can be found at Darnell’s SmartGridElectronics.Net.
Share this story
Send via E-mail
Post to Twitter
On the Web:
White Papers
March 11, 2013
Power Modules for Charger Applications
Sponsored by Vincotech
February 27, 2013
The Adaptive Cell Converter Topology Enables Constant Efficiency Over Universal Input AC Line in Front-End, High-Density Power Factor Correction Applications
Sponsored by Vicor Corp.
February 27, 2013
From 48 V direct to Intel VR12.0: Saving "Big Data" $500,000 per datacenter, per year
Sponsored by Vicor Corp.
More White Papers
- Altera Acquires Enpirion for $140 Million, Forms Power Business Unit
- Ericsson Saves Board Space with Surface-Mount Digital Bus Converter
- SiC and GaN Again a Major Focus at PCIM Europe
- SiC Modules, IGBTs and Super-Junction MOSFETs Introduced on Day One of PCIM
- PowerbyProxi Joins Wireless Power Consortium
- Vincotech and Infineon Introduce New Packaging Options at PCIM Europe
- Bosch Claims First Sub-$450 240V EV Charging Station
- Eaton and CA Technologies Join to Deliver Infrastructure Management for Data Centers
- DOE Selects Consortium to Develop Next-Generation Batteries for Automobiles
- Dana Receives Grant from NRCan to Improve Thermal Management for EV Battery Packs
- Renesas Adds IGBT Drivers with Micro-Isolator for Electric and Hybrid Vehicle Inverters
- European Project Reports Achievements in Drive to Shape the Future of Power Microelectronics
- Bosch Claims First Sub-$450 240V EV Charging Station
- Alpha and Omega Delivers "Lowest" On-Resistance in a DFN5x6 with 150V Power MOSFET
- U.S. Launches Competition for "Next-Generation Power Electronics Manufacturing" Institute
- Vicor Reports Reduced Q1 Results – Anticipates a Brighter Future
- Eltek's New Rectifier Delivers 97.2% Efficiency for Data Center and Server Powering
- Ericsson Saves Board Space with Surface-Mount Digital Bus Converter
- LG Chem Announces Plans for Start of Production of Automotive Li-Ion Batteries
- 500W Full-Brick DC-DC Converter Optimized for Fuel Cell Applications
- Green Building Power Forum 2010: Fujitsu Components America
- Darnell's Digital Power Forum 2009: CUI Incorporated
- Green Building Power Forum 2010: EMerge Alliance
- Green Building Power Forum 2010: Anderson Power Products
- Green Building Power Forum 2009: Independence Station
- Darnell's Digital Power Forum 2009: Coilcraft
- Darnell's Digital Power Forum 2009: Champs Technologies
- Darnell's Digital Power Forum 2009: EXAR Corporation
- Darnell's Digital Power Forum 2009: PMBus
- Darnell's Digital Power Forum 2009: Power Plaza
Design Features
October 22, 2012
Energy Efficiency with Class D Amplifier Modules
Class-D switching amplifiers are helping audio designers create personal multimedia devices and home audio/visual systems that demonstrate how compact and stylish equipment can also deliver high sound quality and high audio output power. The key to this breakthrough, providing freedom from the large and bulky boxes housing traditional audio products, lies in the class-D amplifier’s high energy efficiency, which is typically around 90%. This allows designers to reduce or eliminate heatsinks as well as using smaller-sized PCBs and smaller components such as transformers, connectors and power supplies.
Design Features
October 8, 2012
The Role of Hall Effect Sensors in Power Distribution Infrastructure
Power distribution units (PDUs) form an essential part of modern computing and data communications hardware. They provide multiple outputs for transferring electrical power with maximum efficiency, controlling the power capacity and safeguarding against the possible causes of supply interruption. With an ever increasing need from tech savvy consumers for higher data throughput and greater quantities of data storage capacity, as well as tough international legislation now governing CO&sub2; emissions, the demands being placed on these units are proving challenging for engineering teams to satisfy.
Product Focus
August 13, 2012
The Year in AC-DC Power Supply Technology
The past year witnessed significant new product releases, technological developments, and industry news related to the field of AC-DC Power Supply technology.