.gif)
.gif)
New Products
April 20, 2012
Allegro MicroSystems Announces New General Purpose Bipolar Switch
Allegro MicroSystems announced the release of a new bipolar switch designed with a high speed chopping circuit to null out offsets and dramatically improve switching repeatability. Allegro’s A1250 is an extremely temperature-stable and stress-resistant Hall-effect, bipolar switch. This device is especially suited for operation over extended temperature ranges to +150°C. Superior high temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally resulting from device overmolding, temperature dependencies, and thermal stress. This new device is targeted at the automotive, industrial and consumer markets.
Recommended: Ideal Diode Bridge Controller Minimizes Rectifier Heat and Voltage Loss
The A1250 design includes on a single silicon chip a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilization, Schmitt trigger, and a short-circuit-protected, open-collector output. A south pole of sufficient strength will turn the output on. A north pole is necessary to turn the output off.
An on-board regulator permits operation with supply voltages of 3.0 to 24V. The advantage of operating at 3.0V is that it can be used in 3V applications or additional external resistance can be added in series with the supply pin for greater protection in applications that can supply higher voltages.
Related: Power-One Announces New Open-Frame Products for Industrial and Medical Applications
Two package styles provide a magnetically optimized package for most applications. Package type LH is a modified SOT-23W surface mount package, while the UA package is a three-lead, ultra-mini-SIP for through-hole mounting. Each package type is only available as lead (Pb) free (suffix, -T), with a 100% matte tin plated lead frame.
Pricing (in quantities of 1,000) is as follows: A1250LLHLT-T at $0.55; A1250LLHLXT at $0.54; and A1250LUA-T at $0.58.
Opinion: Challenging Applications Call for Easier, All-In-One Digital Power Modules
More news and information regarding the latest developments in Smart Grid electronics can be found at Darnell’s SmartGridElectronics.Net.
Share this story
Send via E-mail
Post to Twitter
On the Web:
White Papers
March 11, 2013
Power Modules for Charger Applications
Sponsored by Vincotech
February 27, 2013
The Adaptive Cell Converter Topology Enables Constant Efficiency Over Universal Input AC Line in Front-End, High-Density Power Factor Correction Applications
Sponsored by Vicor Corp.
February 27, 2013
From 48 V direct to Intel VR12.0: Saving "Big Data" $500,000 per datacenter, per year
Sponsored by Vicor Corp.
More White Papers
- Ericsson Delivers 750W Quarter-Brick using Proprietary HRR Topology
- IXYS Introduces an Anode-Gated Thyristor Technology Platform
- Dreamliner Nightmares a Factor in New UL Standards Activities for Li-ion Batteries
- Ideal Diode Bridge Controller Minimizes Rectifier Heat and Voltage Loss
- Siemens Installing Regenerative Energy Storage Unit on Light Rail Line
- Silicon Labs acquires Energy Micro for IoT, Smart Energy and Portable Electronics
- NXP Brings High Efficiency to 12V MR16 Lamps with Dimmable LED Controller
- Ultra-Compact High-Efficiency Power Supplies for Automotive Applications
- Curtis Industries Acquires California-based Tri-Mag
- Convection-Cooling Eliminates Fan Maintenance and Audible Noise in 250W Power Supplies
- Siemens Installing Regenerative Energy Storage Unit on Light Rail Line
- Ericsson Delivers 750W Quarter-Brick using Proprietary HRR Topology
- Convection-Cooling Eliminates Fan Maintenance and Audible Noise in 250W Power Supplies
- Single-Stage LED Drivers Deliver Dimming and Thermal Protection with Lower BOM Cost
- GE Intros Megawatt UPS Global Platform with Industry-Leading Efficiency
- Dow Corning adds Thermal Management Options Optimized for Electronics Applications
- Dreamliner Nightmares a Factor in New UL Standards Activities for Li-ion Batteries
- ABB Demonstrates Technology to Power Flash Charging Electric Bus in 15 Seconds
- Delta Acquires Neo Solar Power, Forms Taiwan's Largest Maker of PV Cells and Modules
- Eltek Showcases New Solar Energy Storage System at Intersolar Munich 2013
- Green Building Power Forum 2010: Fujitsu Components America
- Darnell's Digital Power Forum 2009: CUI Incorporated
- Green Building Power Forum 2010: EMerge Alliance
- Green Building Power Forum 2010: Anderson Power Products
- Green Building Power Forum 2009: Independence Station
- Darnell's Digital Power Forum 2009: Coilcraft
- Darnell's Digital Power Forum 2009: Champs Technologies
- Darnell's Digital Power Forum 2009: EXAR Corporation
- Darnell's Digital Power Forum 2009: PMBus
- Darnell's Digital Power Forum 2009: Power Plaza
Design Features
October 22, 2012
Energy Efficiency with Class D Amplifier Modules
Class-D switching amplifiers are helping audio designers create personal multimedia devices and home audio/visual systems that demonstrate how compact and stylish equipment can also deliver high sound quality and high audio output power. The key to this breakthrough, providing freedom from the large and bulky boxes housing traditional audio products, lies in the class-D amplifier’s high energy efficiency, which is typically around 90%. This allows designers to reduce or eliminate heatsinks as well as using smaller-sized PCBs and smaller components such as transformers, connectors and power supplies.
Design Features
October 8, 2012
The Role of Hall Effect Sensors in Power Distribution Infrastructure
Power distribution units (PDUs) form an essential part of modern computing and data communications hardware. They provide multiple outputs for transferring electrical power with maximum efficiency, controlling the power capacity and safeguarding against the possible causes of supply interruption. With an ever increasing need from tech savvy consumers for higher data throughput and greater quantities of data storage capacity, as well as tough international legislation now governing CO&sub2; emissions, the demands being placed on these units are proving challenging for engineering teams to satisfy.
Product Focus
August 13, 2012
The Year in AC-DC Power Supply Technology
The past year witnessed significant new product releases, technological developments, and industry news related to the field of AC-DC Power Supply technology.