.gif)
.gif)
New Products
July 14, 2010
STMicro Shrinks Space Requirement for Mandatory Surge Protection
STMicroelectronics (ST) has announced what it describes as an innovation that will help reduce the size and cost of surge protectors for electronic equipment by providing specified energy absorption capability up to the maximum operating temperature. ST says that competing devices must be derated significantly at temperatures above 25°C.
Surge protection is mandatory for most electronic equipment, to prevent power supply fluctuations or electrostatic discharges from damaging sensitive circuitry. A diode array, or Transil™, is commonly used to divert the surge energy to ground, away from the circuitry. Hundreds of millions of these devices are used every year, in new products of all types – from handhelds to high-power equipment. A Transil’s energy absorption capability is usually specified at 25°C, reducing to zero at its maximum temperature. Designers often use larger devices to ensure protection over the equipment’s operating range.
ST’s new SMxJ and SMxT series Transils are the first to remedy this by maintaining high surge protection all the way to the device’s maximum junction temperature. This allows engineers to use a smaller, lower-cost device with the assurance that adequate protection will be provided. There are six different series in the range, with specified surge energy from 100 to 1500W (10/1000-microsecond pulse) thereby covering a broad spectrum of applications.
Additional benefits of the SM series include an 80% reduction in leakage current compared to previous generations, which reduces system power consumption and improves energy efficiency. ST also specifies dynamic resistance for its new devices, which allows the clamping voltage to be calculated accurately so as to improve protection and minimize risk of equipment failure.
Major features of SM series include: high surge capability at maximum junction temperature; ESD protection meeting IEC 61000-4-2 and MIL-STD-883G; specified with 8/20µs surge to meet IEC 61000-4-5 for electrical over-stress; leakage current specified at 85°C, meeting telecommunication industry requirements; and an operating temperature range of -40 to 150°C enabling use in consumer, telecom and industrial applications.
Opinion: Bridging the Gap between Off-Grid and Grid-Tied Systems with a Grid-Hybrid Approach
Share this story
Send via E-mail
Post to Twitter
On the Web:
White Papers
March 11, 2013
Power Modules for Charger Applications
Sponsored by Vincotech
February 27, 2013
The Adaptive Cell Converter Topology Enables Constant Efficiency Over Universal Input AC Line in Front-End, High-Density Power Factor Correction Applications
Sponsored by Vicor Corp.
February 27, 2013
From 48 V direct to Intel VR12.0: Saving "Big Data" $500,000 per datacenter, per year
Sponsored by Vicor Corp.
More White Papers
- Altera Acquires Enpirion for $140 Million, Forms Power Business Unit
- Ericsson Saves Board Space with Surface-Mount Digital Bus Converter
- SiC Modules, IGBTs and Super-Junction MOSFETs Introduced on Day One of PCIM
- SiC and GaN Again a Major Focus at PCIM Europe
- PowerbyProxi Joins Wireless Power Consortium
- Vincotech and Infineon Introduce New Packaging Options at PCIM Europe
- Bosch Claims First Sub-$450 240V EV Charging Station
- Eaton and CA Technologies Join to Deliver Infrastructure Management for Data Centers
- DOE Selects Consortium to Develop Next-Generation Batteries for Automobiles
- Dana Receives Grant from NRCan to Improve Thermal Management for EV Battery Packs
- Renesas Adds IGBT Drivers with Micro-Isolator for Electric and Hybrid Vehicle Inverters
- European Project Reports Achievements in Drive to Shape the Future of Power Microelectronics
- Bosch Claims First Sub-$450 240V EV Charging Station
- Vicor Reports Reduced Q1 Results – Anticipates a Brighter Future
- GE Opens $1.5 Million New Product Introduction Accelerator Lab
- Alpha and Omega Delivers "Lowest" On-Resistance in a DFN5x6 with 150V Power MOSFET
- ROHM Claims New Hybrid MOS Combines the Best Characteristics of MOSFETs and IGBTs
- SL Packs 60 Watts of Industrial-Grade AC-DC Power in Small and Robust Package
- 500W Full-Brick DC-DC Converter Optimized for Fuel Cell Applications
- Altera Acquires Enpirion for $140 Million, Forms Power Business Unit
- Green Building Power Forum 2010: Fujitsu Components America
- Darnell's Digital Power Forum 2009: CUI Incorporated
- Green Building Power Forum 2010: EMerge Alliance
- Green Building Power Forum 2010: Anderson Power Products
- Green Building Power Forum 2009: Independence Station
- Darnell's Digital Power Forum 2009: Coilcraft
- Darnell's Digital Power Forum 2009: Champs Technologies
- Darnell's Digital Power Forum 2009: EXAR Corporation
- Darnell's Digital Power Forum 2009: PMBus
- Darnell's Digital Power Forum 2009: Power Plaza
Design Features
October 22, 2012
Energy Efficiency with Class D Amplifier Modules
Class-D switching amplifiers are helping audio designers create personal multimedia devices and home audio/visual systems that demonstrate how compact and stylish equipment can also deliver high sound quality and high audio output power. The key to this breakthrough, providing freedom from the large and bulky boxes housing traditional audio products, lies in the class-D amplifier’s high energy efficiency, which is typically around 90%. This allows designers to reduce or eliminate heatsinks as well as using smaller-sized PCBs and smaller components such as transformers, connectors and power supplies.
Design Features
October 8, 2012
The Role of Hall Effect Sensors in Power Distribution Infrastructure
Power distribution units (PDUs) form an essential part of modern computing and data communications hardware. They provide multiple outputs for transferring electrical power with maximum efficiency, controlling the power capacity and safeguarding against the possible causes of supply interruption. With an ever increasing need from tech savvy consumers for higher data throughput and greater quantities of data storage capacity, as well as tough international legislation now governing CO&sub2; emissions, the demands being placed on these units are proving challenging for engineering teams to satisfy.
Product Focus
August 13, 2012
The Year in AC-DC Power Supply Technology
The past year witnessed significant new product releases, technological developments, and industry news related to the field of AC-DC Power Supply technology.